VNX301受験資格、VNX301全真模擬試験

ご存じのとおり、競争の激しい世界では、国際的なVNX301認定、実務経験、学歴など、ソフトウェアの能力を向上させる以外に選択肢はありません。したがって、履歴書を強調するためにVNX301証明書を手に入れることは非常に重要であり、職場で成功を収めるのに役立ちます。 VNX301準備資料を使用すると、最も効率的かつ生産的な方法で試験に簡単に合格し、献身と熱意を持って勉強する方法を学ぶことができます。 Versa NetworksのVNX301問題集には多くの利点があります。

Versa Networks VNX301 認定試験の出題範囲：

トピック	出題範囲
トピック 1	VersaセキュアSD-WANインフラストラクチャ：コントローラー、ディレクター、サイト間のセキュアな接続など、VersaのSD-WANプラットフォームの中核となるコンポーネントとアーキテクチャに焦点を当てます。
トピック 2	Versa SD-WANサービス：アプリケーション制御、トラフィックポリシー、SLA監視、リンクアグリゲーションなど、Versaプラットフォームを通じて提供されるWANサービスを対象としています。
トピック 3	構成とプロビジョニング：テンプレートやゼロタッチプロビジョニングワークフローを含め、Versa Directorを使用してSD-WANデバイスとサービスを展開、構成、オンボーディングする方法について説明します。
トピック 4	アンダーレイ／オーバーレイ技術：基盤となるトランスポートネットワーク（アンダーレイ）と、その上に構築される仮想ネットワーク（オーバーレイ）を網羅し、SD-WAN展開で使用されるトンネリングプロトコルも含まれる。

>> VNX301受験資格 <<

VNX301全真模擬試験、VNX301資格難易度

銀行市場の急速な変化に合わせて、最新のVNX301学習教材を提供し、より多くの知識を確実に習得できるようにしています。また、VNX301トレーニングクイズが市場に登場して以来、プロの作業チームは長年の教育的背景と職業トレーニングの経験を積んでいるため、VNX301準備資料は優れた信頼性、完璧な機能、強力な実用性を備えています。私たちが提供できる多くの利点があるので、動かして、VNX301トレーニング資料を試してみませんか？

Versa Networks Versa Certified SD-WAN Specialist (VNX300) 認定 VNX301 試験問題 (Q48-Q53):

質問 # 48
Examine the exhibit below.

As an administrator of a Versa Secure SD-WAN deployment, you are asked to find the current bandwidth of each WAN circuit used for SD-WAN connectivity in a branch, but Versa Director is not displaying any information for the WAN circuits. In this scenario, what should be done to get the graph populated for all WAN circuits?

A. Refresh the page to get the graphs populated in the dashboard.
B. Select Live Data for MPLS circuits alone.
C. Select Live Data for all WAN circuits in the dashboard.
D. Unselect Live Data for the INET circuit and select it again.

正解：C

解説：
The correct answer is B . In the exhibit, Versa Director shows multiple branch interfaces and a Live Data column. To populate the bandwidth graph with current real-time statistics for all WAN circuits, Live Data must be selected for each WAN circuit that should be monitored. Versa documentation states that from a Director node, administrators can monitor VOS devices, provider organizations, tenants, events, and alarms. It also explains that Versa Director, together with Versa Analytics, can poll VOS devices in real time to provide visibility into what is happening on those devices and to assist with troubleshooting.
Because the requirement is to find the current bandwidth of each WAN circuit, simply refreshing the page is not enough. Refreshing only reloads the dashboard; it does not enable real-time polling for interfaces that are not selected. Selecting Live Data only for MPLS circuits would populate only MPLS- related data and would not satisfy the requirement for all WAN circuits. Unselecting and reselecting only the INET circuit affects only that one circuit. Therefore, the correct operational step is to enable Live Data for all WAN circuits shown in the branch interface dashboard.

質問 # 49
During branch onboarding, you need to verify whether the Controller has sent branch-connect and branch- disconnect notifications to Versa Director. Which CLI command should be used?

A. show alarms
B. show interfaces detail
C. show cgnat acl info
D. show system storage

正解：A

解説：
The correct answer is A . Versa troubleshooting documentation states that after a branch device successfully establishes an IPsec connection to the Controller node, the Controller sends a notification to the Director node. To display the details of this notification, the documentation instructs administrators to issue the show alarms CLI command. It also provides examples using show alarms | match branchd | match br101 to view branch-connect and branch-disconnect events.
These alarm entries are valuable during onboarding because they show whether the branch reached the Controller, whether staging progressed, and whether the branch later disconnected. For example, branch lifecycle notifications include factory-default connection, staged connection, Stage 3 connection with WAN IP addresses, and branch disconnect events.
show system storage is useful for disk usage, show interfaces detail helps with link state, speed, duplex, and interface counters, and show cgnat acl info is used for CGNAT matching. None of those commands directly confirms branch lifecycle notifications between Controller and Director.

質問 # 50
A branch uses a template variable for the WAN VLAN ID. During deployment, Branch-A receives VLAN
100 and Branch-B receives VLAN 200 from device bind data while using the same template. Which statement is correct?

A. This is impossible because all devices using a template must share identical VLAN IDs.
B. The Controller automatically rewrites VLAN IDs after IPsec comes up.
C. The device template must be duplicated for each branch.
D. This is expected because template variables allow unique per-device values.

正解：D

解説：
The correct answer is A . Versa template-based provisioning is designed to separate common configuration from site-specific values. A device template can define common interface, service, routing, and SD-WAN behavior, while variables and device bind data provide unique values for each appliance. This allows the same template to be reused across many branches while assigning different WAN IP addresses, gateways, VLAN IDs, circuit names, or other per-site parameters during onboarding.
In this scenario, Branch-A and Branch-B use the same template but receive different WAN VLAN IDs from bind data. That is normal and expected in a scalable SD-WAN deployment. Without variables, administrators would need to create a separate template for every site, which would be operationally inefficient and increase configuration drift.
The Controller does not automatically rewrite VLAN IDs after IPsec comes up; VLAN IDs must be part of the generated device configuration. It is also not required to duplicate the device template for each branch. The correct Versa design is reusable templates plus unique bind-data values.

質問 # 51
A branch device is stuck after staging. The Controller does not show the expected branch lifecycle notification. Which statement best describes the role of MP-BGP in the provider organization for this process?

A. MP-BGP is recommended so notifications for relevant branch events are delivered to Versa Director.
B. MP-BGP replaces IKE and IPsec during branch staging.
C. MP-BGP is required only for URL filtering category updates.
D. MP-BGP is used only between branch LAN routers and user subnets.

正解：A

解説：
The correct answer is A . Versa branch troubleshooting documentation states that the provider organization should have MP-BGP configured for SD-WAN deployments so that notifications for all relevant branch events are delivered to the Versa Director node. This is significant during onboarding because branch lifecycle events, such as branch-connect and branch-disconnect, help Director determine where the branch is in the staging process and whether the next configuration push should occur.
MP-BGP does not replace IKE or IPsec. The branch still establishes IKE/IPsec to the staging server or Controller depending on the staging phase. MP-BGP also has nothing to do with URL filtering category updates. While BGP can be used in LAN or WAN routing designs, the specific issue described here concerns provider-organization SD-WAN control-plane event delivery.
Therefore, if branch lifecycle events are not appearing properly, validating provider-organization MP- BGP configuration is part of the correct troubleshooting workflow, especially in addition to checking data-path and IPsec connectivity.

質問 # 52
You configured a Versa speed-test server on a VOS device, but the client cannot start the bandwidth test. A firewall exists between the client and server. Which port must be allowed through the firewall?

A. UDP 4790
B. TCP 443
C. UDP 53
D. TCP 5201

正解：D

解説：
The correct answer is A . Versa link-bandwidth troubleshooting documentation explains that a VOS device can be configured as a Versa speed-test client, a Versa speed-test server, or both simultaneously. After the server is configured, the client starts the test by initiating a TCP-based connection toward the speed-test server. The server listens on port 5201 . The documentation includes an explicit note that if the VOS device is behind a firewall, port 5201 must be open .
This is different from the SD-WAN overlay data path, which commonly uses UDP-based transport encapsulation, and different from internet speed-test traffic, which uses other ports depending on the specific test type. In this scenario, the question states that a Versa speed-test server was configured, so the relevant requirement is TCP 5201 reachability from the client to the server.
TCP 443 may be used for management or web access, UDP 4790 is associated with SD-WAN transport encapsulation, and UDP 53 is DNS. None of those replace TCP 5201 for Versa speed-test server operation.

質問 # 53
......

数千人の専門家で構成された権威ある制作チームが、VNX301学習の質問を理解し、質の高い学習体験を楽しんでいます。試験概要と現在のポリシーの最近の変更に応じて、VNX301テストガイドの内容を随時更新します。また、VNX301試験の質問は、わかりにくい概念を簡素化して学習方法を最適化し、習熟度を高めるのに役立ちます。さらに、VNX301テストガイドを使用すると、試験を受ける前に20〜30時間の練習で準備時間を短縮できることは間違いありません。

VNX301全真模擬試験: https://www.jpntest.com/shiken/VNX301-mondaishu